"ROLLS"  HDPE Roll sizes            Click here for product Data Sheet

HDPE geomembrane High density polyethylene is the most widely used product for lining of solid
waste sites, mines, and other fluid containment applications. It is preferred for sites requiring low permeability
and exceptional chemical and ultraviolet resistance properties.
Resistance to weather, ultraviolet rays and chemicals makes it's use an extremely cost effective alternative in
reservoir construction. HDPE is also resistant to mould, mildew, fungus and chemicals normally found in soil.
Unlike other products our geomembranes do not contain plasticizers that could migrate and cause premature
aging of the liner or contaminate drinking water. Because our products do not degrade from ultraviolet or other
environmental factors, they do not need to be buried for protection
 
Roll dimensions for "SMOOTH" HDPE geomembrane
THICKNESS WIDTH LENGTH AREA
mm m m m2
0.50 7.00 420 2940
0.75 7.00 280 1960
1.00 7.00 210 1470
1.50 7.00 140 980
2.00 7.00 105 735
2.50 7.00 85 595
3.00 7.00 70 490
 
A maximum of sixteen (16) rolls of HD can be placed into a 40' standard container and 40' open top container
Roll dimensions for "TEXTURED" HDPE geomembrane
THICKNESS WIDTH LENGTH AREA
mm m m m2
0.75 7.00 198 1386
1.00 7.00 152 1064
1.50 7.00 128 896
2.00 7.00 98 686
2.50 7.00 76 532
 
A maximum of twelve (12) rolls of HDX can be placed into a 40' standard container and 40' open top container
Each roll of HDPE geomembrane is identified by two labels, the first visibly protruding from one end of the roll,
while the second is placed under the outermost layer of the geomembrane at the opposite end. These labels
both indicate the type of geomembrane, roll number, thickness, length of the roll, width of the roll and weight.
Each roll is also provided with the two slings to aid in the handling of the rolls on site. The above dimensions
are approximate. Custom lengths are available upon request.

PLEASE CONTACT US FOR PRICING

Close Window