HDPE Roll
HDPE geomembrane High density polyethylene is the most widely used product for lining of solid waste sites, mines, and other fluid containment applications. It is preferred for sites requiring low permeability and exceptional chemical and ultraviolet resistance properties.
Resistance to weather, ultraviolet rays and chemicals makes it's use an extremely cost effective alternative in reservoir construction. HDPE is also resistant to mould, mildew, fungus and chemicals normally found in soil.
Unlike other products our geomembranes do not contain plasticizers that could migrate and cause premature aging of the liner or contaminate drinking water. Because our products do not degrade from ultraviolet or other environmental factors, they do not need to be buried for protection.
Resistance to weather, ultraviolet rays and chemicals makes it's use an extremely cost effective alternative in reservoir construction. HDPE is also resistant to mould, mildew, fungus and chemicals normally found in soil.
Unlike other products our geomembranes do not contain plasticizers that could migrate and cause premature aging of the liner or contaminate drinking water. Because our products do not degrade from ultraviolet or other environmental factors, they do not need to be buried for protection.
Smooth HDPE Geomembrane - roll dimensions
A maximum of sixteen (16) rolls of HD can be placed into a 40' standard container and 40' open top container.
Thickness (mm)
0.50 0.75 1.00 1.50 2.00 2.50 3.00 |
Width (m)
7.00 7.00 7.00 7.00 7.00 7.00 7.00 |
Length (m)
420 280 210 140 105 85 70 |
Area (m2)
2940 1960 1470 980 735 595 490 |
Textured HDPE Geomembrane - roll dimensions
A maximum of twelve (12) rolls of HDX can be placed into a 40' standard container and 40' open top container.
Thickness (mm)
0.75 1.00 1.50 2.00 2.50 |
Width (m)
7.00 7.00 7.00 7.00 7.00 |
Length (m)
198 152 128 98 76 |
Area (m2)
1386 1064 896 686 532 |
Each roll of HDPE geomembrane is identified by two labels, the first visibly protruding from one end of the roll, while the second is placed under the outermost layer of the geomembrane at the opposite end. These labels both indicate the type of geomembrane, roll number, thickness, length of the roll, width of the roll and weight.
Each roll is also provided with the two slings to aid in the handling of the rolls on site.
The above dimensions are approximate. Custom lengths are available upon request.
Each roll is also provided with the two slings to aid in the handling of the rolls on site.
The above dimensions are approximate. Custom lengths are available upon request.
HDPE specifications
HDPE is a smooth, high quality, high density polyethylene geomembrane produced from specially formulated virgin polyethylene resin. This resin is designed specifically for flexible geomembrane applications. It contains approx. 97.5% polyethylene, 2.5% carbon black and trace amounts of antioxidants and heat stabilizers; no other additives, fillers or extenders are used. HDPE has outstanding chemical resistance, mechanical properties, environmental stress crack resistance, dimensional stability snf thermal aging characteristics. HDPE has excellent resistance to UV radiation and is suitable for exposed
conditions.
These product specifications meet or exceed GR1 GM13.
conditions.
These product specifications meet or exceed GR1 GM13.